 |
|
|
|
Road Category - Vertigo Corsa |
 |
 |
 |
 |
WHITE
ANTHRACITE |
BLUE
WHITE |
BLUE
YELLOW |
BLACK
ANTHRACITE |
|
 |
|
UPPER -
Lorica®
LINED
- air Teflon mesh
CLOSURE - zip with added
a small elastic panel to aid in a smooth zipper operation
TECNOLOGY - TECNO VR SYSTEM
-
TECNO II SYSTEM
- SYSTEM FOR ANKLE SUPPORT
- AIR VENTILATION SYSTEM
- SHOCK ABSORBING HEEL CUP
SHIN PLATE - carbon fibre, interchangeable
SLIDER
- with ceramic inserts inside, to prevent wear and tear.
SOLE
- rubber sole, with slip-proof design.
All parts of the boot can be replaced.
|
|
| RED
ANTHRACITE |
|
|
|
| |
Descrizione
The “Vertigo Corsa” racing boot, developed
by Sidi is a perfect blend of comfort and high performance
for champions and for all motor bike fans.
Vertigo Corsa has a range of innovative features making
it a unique boot; the rear part can be adjusted to cling
perfectly to the calf.
Produced in Lorica® and lined with Teflon fabric
protection. Teflon acts as an invisible protection to
provide maximum water and stain repellency, so the boots
dry quicker and moulds do not form.
Sidi has added a small elastic panel to aid in a smooth
zipper operation as it allows a bit of movement via
the elastic as the zipper passes over the riders’s
ankle ball
The leg portion - in polyurethane - is fitted with the
TECNO VR closing system patented by Sidi, to provide
adjustments via a nylon thread passing through two lateral
holes. Pull on the thread to wrap the boot symmetrically
and snugly around the calf.
Created in order to provide the maximum protection in
cases of impact, Vertigo Corsa has a close-fitting,
wrap-around fascia over the bridge of the foot which
can be precision adjusted by the TECNO-II device, preventing
the foot from sliding forward and protecting the toes.
To put the boot on, open the TECNO-II closing mechanism
by pressing the locking button in the direction of the
arrow and loosen the nylon thread a little; lift and
detach the hooked button and loosen the instep strap
VR. After putting on the boot move the instep strap
back to its central position, hook up the button and
after lifting the arc-shaped handle, turn it clockwise
until you feel comfortable.
Do not turn the handle anticlockwise.
Another safety feature of Vertigo Corsa is the “ankle
support system” preventing the foot from twisting
and protecting the ankle against impact. The thermoplastic
resin support with two outer and one inner “beam”
is very tough but allows the ankle to move and provides
comfort.
The lower outer beam is fitted with an air intake which
can be opened or closed according to needs, by a simple
pushbutton.
For a greater foot safety, the heel of the Vertigo Corsa
model is fitted with a transparent polycarbonate shell
with two anti-impact shock absorbers.
The transparent shell has 3 mm of impact movement.
On the outside, the Vertigo Corsa model is complete
with an interchangeable front in carbon fibre to protect
the shin and with ceramic inserts inside the toe slider,
to prevent wear and tear.
The new rubber sole was created with slip-proof design.
The ankle area is padded inside.
|
|
|
|
|
|
Size: 39
40 41 42 43 44 45 46 47 48 |
|
|
|
|
|
|
|
